王泽众.热管理系统在发动机台架试验中的优化应用[J].内燃机工程,2017,38(2):15-16.
热管理系统在发动机台架试验中的优化应用
Optimization and Application of Thermal Management System in Engine Bench Test
DOI:
关键词:内燃机  发动机台架试验  电涡流测功机  热管理系统  Flowmaster仿真
Key Words:IC engine  engine bench test  eddy current dynamometer  thermal management system  Flowmaster simulation
基金项目:
作者单位
王泽众 上海大众汽车有限公司上海 201805 
摘要点击次数: 3274
全文下载次数: 2164
摘要:针对发动机台架试验中发动机水温波动大、电涡流测功机供水不足等问题,设计了一套两级冷却系统,即在发动机小车上加装热交换器以解决发动机冷却问题。结合发动机功率、台架供水流量等条件,利用Flowmaster进行仿真,实际安装后进行台架试验。研究结果表明:发动机水温稳定在±3 ℃内,电涡流测功机冷却水较方案修改前增加4 m3/h。
Abstract:To prevent engine coolant temperature fluctuation and insufficient water supply in an eddy current dynamometer during engine bench tests, a second stage cooling system was added to engine pilot as a solution. First, a simulation of the system was performed with the Flowmaster based on relevant parameters to optimize the system, and then a comparison experiment was conducted to verify the simulation. The results show that the temperature of the engine coolant can be stable within±3 ℃, water flow rate in the dynamometer is 4 m3/h more than before.
查看全文  HTML   查看/发表评论