熊兴旺，马凡华，黄跃.20%HCNG发动机试验研究与平均值建模[J].内燃机工程,2017,38(4):134-138.
20%HCNG发动机试验研究与平均值建模
Experimental Research and Mean Value Modeling of a 20% HCNG Engine
DOI：
关键词:内燃机  天然气掺氢发动机  平均值模型  多项式拟合
Key Words:IC engine  HCNG engine  mean value engine model  polynomial fitting
基金项目:国家自然科学基金项目(51276095)
作者单位
熊兴旺，马凡华，黄跃 1.中国汽车技术研究中心，北京 100176；2.清华大学 安全与节能国家重点实验室，北京 100084 
摘要点击次数: 2806
全文下载次数: 1798
摘要:进行了20%天然气掺氢(HCNG)发动机试验，根据空气和燃气的混合气流量、进气歧管压力、转速、节气门开度等参数间的拟合关系，提出了预测混合气流量和进气歧管压力的经验公式，并得出在相同发动机转速条件下，进气歧管压力与有效效率之积(pmanηe)和进气歧管压力与转速之积(pman n)呈近似线性关系。建立了20%HCNG发动机平均值模型，分别进行了稳态工况和瞬态工况仿真验证，仿真数据与试验数据吻合较好。
Abstract:An experiment on a 20% hydrogen enriched CNG (HCNG) engine was conducted. Based on the fitting relationship between air-gas mixture flow rate, inlet manifold absolute pressure, engine speed and throttle opening degree, empirical formulas were proposed to predict air-gas mixture flow rate and inlet manifold absolute pressure, and an approximate linear relationship between the product of inlet manifold absolute pressure and effective thermal efficiency (pmanηe) and the product of inlet manifold absolute pressure and engine speed (pmann) was obtained at the same engine speed. Furthermore, a 20% HCNG mean value engine model was established, which was verified under steady state and transient conditions. Results show that the simulation datas are in good agreement with the experimental results.
查看全文  HTML   查看/发表评论